Dry Storage is Crucial. Your water park must be stored completely dry. Drain most of the water out of the pool by stepping on the splash wall at the lowest point with your foot, allowing the water to run out. Or, if you can, tilt the Inflatable Water Park, while inflated, so all the water runs out of the pool. If the above methods are not possible, shut off the blower and allow the unit to deflate and drain. Once all the water is out of the main pool, re-inflate the Water Park, and tie off any air outlets.

 

 

After draining the pool, manager can do a few things as follows: Re-inflate the Water Park if necessary; Allow the blower to run until the material is visibly dry; Open the outlet tube, and continue to let air circulate through the product until it is dry inside; Do not leave your Inflatable outside when not in use as prolonged sun exposure can corrode the material.

 

 

Though most mild cleaning products are acceptable for cleaning your Inflatable Water Park, we recommend this high-tech recipe: Soap and Water. Before each use, for safety reasons, we recommend that you inspect your  Inflatable for signs of damage or areas of failure. If damage or failure is detected, you may repair your Inflatable according to directions in the repair guide that comes with your Inflatable Water Park.