The maintenance of the intex swimming pool is reflected in two aspects: the maintenance of the steel frame and the maintenance of the PVC fabric. The steel frame should be regularly cleaned with a damp cloth to avoid paint peeling and rusting. The maintenance of PVC fabric is reflected in the application of daily water treatment and circulation systems to keep the water in the intex swimming pool clean. After using it every quarter, wipe off the green moss from the bottom of the pool, cool and dry it, and pack it into storage.

 

 

1、 Drain the water from the pool and then release the gas from the edge chamber for cleaning.

 

 

2、 Cut the repair patch. The patch should be cut to three times the size of the repaired area, preferably circular or elliptical.

 

 

3、 First apply the primer. Wipe the area and patch that need to be repaired clean, evenly apply special adhesive, and then use a hair dryer to blow until it does not stick to your hands. Natural air drying is also acceptable.

 

 

4、 Apply adhesive for repair. Apply special adhesive evenly to the repaired area and patch that have just dried, and handle it as before until it does not stick to the hands.

 

 

5、 Adhesive. Align the repair patch with the repair area and slowly apply it in one direction, taking care not to generate bubbles, and then press it flat with your hand.

 

 

6、 Press firmly. After being glued, place it on a flat hard object and press it with a flat hard object for 24 hours before use.